1. The oven is packed safely and for
easy transportation. Do not drop it or
allow hard knocks
2. Cut the packing bands and remove
the top and side cardboards
4. Remove wooden stone supports from
top deck. Remove legs (carefully) and
accesories from inside. Replace the
wooden stone supports
For 1 or 2 Decks Ovens Follow
Steps 5 to 15
6. If the oven has a Steam System,
place ”wooden blocks” to lay the oven
down in a higher position
7. Turn the oven back side down, make
sure that the stones have not moved
8. Use a pallet jack/ pallet truck to
transport the oven in this position to
pass through doors or narrow areas
3. DO NOT carry the oven by the door
handle and do not remove the wooden
stone supports until the oven is installed
Steps for 1 to 2 decks ovens
5. Place a pallet behind the oven
Unpack and prepare
Installation – Assembly oven
To Next Page
Loading...
