Planet GSD-1022UP - Installing the SFP Transceiver

11
3.4 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot of the
GSD-1022UP.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in
and out the transceiver to/from any SFP port without having to power down
the GSD-1022UP as shown in Figure 3-5.
MGB-Series
SFP Transceiver
LC Fiber Cable
1
2
Figure 3-5: Plugging In the SFP Transceiver
 Approved PLANET SFP Transceivers
GSD-1022UP supports both single mode and multi-mode SFP transceivers. The
following list of approved PLANET SFP transceivers is correct at the time of
publication:
Gigabit SFP Transceiver Modules
 MGB-GT
SFP-Port 1000BASE-T Module
 MGB-SX
SFP-Port 1000BASE-SX mini-GBIC module - 550m
 MGB-LX
SFP-Port 1000BASE-LX mini-GBIC module - 20km
 MGB-L30
SFP-Port 1000BASE-LX mini-GBIC module - 30km
 MGB-L50
SFP-Port 1000BASE-LX mini-GBIC module - 50km
 MGB-L70
SFP-Port 1000BASE-LX mini-GBIC module - 70km
 MGB-L120
SFP-Port 1000BASE-LX mini-GBIC module - 120km
 MGB-LA10
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 20km
 MGB-LB10
SFP-Port 1000BASE-LX (WDM,TX:1550nm) - 20km
 MGB-LA20
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 20km
 MGB-LB20
SFP-Port 1000BASE-LX (WDM,TX:1550nm) - 20km
 MGB-LA40
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 40km
 MGB-LB40
SFP-Port 1000BASE-LX (WDM,TX:1550nm) - 40km