8
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the Industrial
ManagedPoE+Switchandtheterminalwilldisplay“runningtestingprocedures”.
Note
The following console screen is based on the IGS-10020HPT.
The display of the IGS-10020PT is the same as that of the IGS-
10020HPT.
When the following dialog box shown in Figure 4-3 appears, please enter the
factorydefaultusername“admin”andpassword“admin”.
Username:admin
Password:admin
Figure 4-3: Console Login Screen
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.