Planet ISW-500T - Top View; Wiring the Power Inputs

9
3.4 Top View
Max. Fault Alarm Loading: 24V, 1A
DC Input: 12-48V
, 0.17A max.
AC Input: 24V
, 0.15A max.
Alarm
V1+ V2+
PWR2PWR1
1 2 3 4 5 6
Figure 5: ISW-500T Top View
Max. Fault Alarm Loading: 24V, 1A
DC Input: 12-48V
, 0.2A max.
AC Input: 24V
, 0.16A max.
Alarm
V1+ V2+
PWR2PWR1
1 2 3 4 5 6
Figure 6: ISW-800T Top View
3.5 Wiring the Power Inputs
The 6-contact terminal block connector on the top panel of Industrial Ethernet
Switch is used for two DC redundant power inputs. Please follow the steps below to
insert the power wire by professionals.
When performing any of the procedures like inserting the wires or tight-
ening the wire-clamp screws, make sure the power is OFF to prevent
from getting an electric shock.
Lorsque vous effectuez l’une des procédures telles que l’insertion des
fils ou le serrage des vis de serrage, assurez-vous que l’alimentation est
coupée pour éviter tout choc électrique.