User Manual of WDRT-1202AC
-67-
Object Description
Check System Log Press to open or save the system log
Enable Logging to Syslog
Enable or disable “Logging to Syslog Server”
SysLog Server IP
Address
Enter the Syslog server IP address
5.4.3 System Settings
5.4.3.1. Administrator
Figure 5-4-5 Administrator
Object Description
Username Enter the new username
Password Enter the new password
Enable Remote
Enable or disable remote management
Remote HTTP Port You can change the remote http port here
Remote HTTPS Port You can change the remote https port here
5.4.3.2. System
This screen allows you to back up, restore, and erase the router’s current settings. Once you have the router
working correctly, you should back up the information to have it available if something goes wrong. When you
back up the settings, they are saved as a file on your computer. You can restore the router’s settings from this
file.
To Next Page
Loading...
Need help?
General
