Planet WGs-4215-8HP2S - 7 Recovering Back To Default Configuration

15
7.RecoveringBacktoDefaultConguration
IPAddresshasbeenchangedoradminpasswordhasbeenforgotten–
To reset the IP address to the default IP address “192.168.0.100” or reset the
login password to default value, press the reset button on the front panel for
about 5 seconds. After the device is rebooted, you can log in the Web interface
management within the same subnet of 192.168.0.xx.
9 10
Reset
100 / 1000X SFP
Reset Button
Figure 7-1: WGS-4215-8HP2S Reset Button