Planet XGS-6311 Series - Page 9

9
The previous command would apply the following settings for the Managed
Switch.
IPv4Address:192.168.1.254
SubnetMask:255.255.255.0
Figure 4-4 Conguring IPv4 Address Screen
To check the current IP address or modify a new IP address for the Managed
Switch,pleaseusetheproceduresasfollows:
 Show the current IP address
1. On ”Switch#” prompt, enter “show ip interface brief”.
2.The screen displays the current IP address, subnet mask and gateway as
showninFigure4-5.
Figure 4-5 Showing IP Information Screen