Planet XGS3-24242 - Ulsm Configuration Task List

68-2
68.2 ULSM Configuration Task List
1. Create ULSM group globally
2. Configure ULSM group
3. Show and debug the relating information of ULSM
1. Create ULSM group globally
Command
explanation
Global mode
ulsm group <group-id>
no ulsm group <group-id>
Configure and delete ULSM group globally.
2. Configure ULSM group
Command
explanation
Port mode
ulsm group <group-id> {uplink |
downlink}
no ulsm group <group-id> {uplink |
downlink}
C
onfigure the uplink/downlink port of
ULSM group, the no command deletes the
uplink/downlink port.
3. Show and debug the relating information of ULSM
Command
Explanation
Admin mode
show ulsm group [group-id]
S
how the configuration information of
ULSM group.
debug ulsm event
no debug ulsm event
Show the event information of ULSM, the
no operation disables the shown
information.