Pair
Get Paired The first time you power on your headphones, the pairing process begins.
1 Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
• iPhone and Android Follow the voice-guided pairing instructions.
• Other phones Use your phone's menu to:
2 Activate Bluetooth
®
on your phone and set it to search for new devices.
3 Select “PLT BB600 Series.”
If necessary, enter four zeros (0000) for the passcode or accept the connection. Once
successfully paired, you hear “pairing successful” and the LEDs stop flashing.
Pair second device 1 Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
2 Select “PLT BB600 Series” in your device's Bluetooth Settings.
Pair to Mac If your Mac is Bluetooth enabled, you can pair your headset to it.
1 Place your headset in pair mode (slide and hold the power button towards the
Bluetooth icon). You will hear "pairing" and the LEDs will flash red and blue.
2 On your Mac, choose Apple menu > System Preferences > Bluetooth.
3 Click Set Up New Device or "+", select "PLT BB600 series stereo" and follow
the onscreen instructions.
3
To Next Page
Loading...
