7
6
SETTING UP THE
OPTIONAL HANDSET LIFTER
Use the directions provided with the
handset lifter to set it up.
MAKING A CALL USING
THE HANDSET LIFTER
Press the talk button on the headset.
The handset lifter will raise the telephone
handset off hook. You will then hear a dial
tone in your headset and can proceed to
make a call as normal.
When you finish your call press the talk
button. The handset lifter then lowers the
handset to end the call.
RECEIVING A CALL USING
THE HANDSET LIFTER
When a new call is received the telephone
rings as normal, but in addition, a ring alert
of three short beeps will be heard in your
headset, also the headset talk indicator light
will flash.
To answer the call press the talk button
on the headset. The handset lifter will then
raise the telephone handset off hook and
you will be able to talk to the caller.
When you have finished your call, press the
talk button on your headset. The handset
lifter then lowers the handset to end the call.
The ring alert
feature (audio
and visual)
is only active
when the
handset lifter
is connected.
RECHARGING THE HEADSET
To recharge the headset, place it into the
charge cradle in the base unit. During
charging, the charge indicator on the
base unit will flash amber.
When the headset is fully charged, the
charge indicator on the base unit will
stop flashing and remain illuminated.
A completely depleted headset requires
a minimum charge time of 1 hour before
use, and 3 hours to fully charge.
NOTE
OPTIONS
REPLACING THE HEADSET BATTERY
Should it be necessary to replace the headset battery at
anytime please refer to the diagrams below.
FEATURES
To Next Page
Loading...
