Plantronics CS500 User Manual

1010 1010
Check configuration and make a test call
1 If your desk phone has a volume control, set it to mid-range.
2 Look at the bottom panel of your base and make sure the default settings are correct. Set your
desk phone’s volume as well.
listening volume dial ( ) = 3 and speaking volume dial ( ) = 3
configuration switch = A
desk phone volume = mid-range
3 Remove the handset from the desk phone cradle.
4 While wearing your headset, press the call button on the headset.
5 If you do not hear a dial tone, adjust the configuration switch (A-G) until you do.
NOTE For most phones, these factory default settings will sound the best.
6 Dial a test call from the desk phone. If needed, fine-tune the volume with the headset volume
controls. You can also adjust the desk phone speaking and listening volumes on the bottom of
the base.

Plantronics CS500 Specifications

General

Wireless Technology	DECT
Range	Up to 350 feet
Noise-Canceling Microphone	Yes
Convertible Wearing Styles	Yes
DECT Security Certification	Yes
Wearing Style	Over-the-head, Over-the-ear
Headset Weight	22 grams