Plantronics CS500 User Manual

1111
Desk phone plus HL10 lifter (sold separately)
NOTE First follow the steps above for Desk phone (standard).
1 Firmly press the handset lifter power cord into the handset lifter jack.
USE
2 While wearing your headset, slide the handset lifter arm under the handset until the lifter base
touches the side of the phone.
3 Slide the lifter up to where it nearly touches the handset earpiece.
4 Press the call control button on your headset to activate the lifter.
5 If you hear a dial tone, the lifter is set correctly and needs no adjustment.
6 Remove the protective strips from the 3 mounting tapes on the underside of the lifter.
7 Gently place the lifter on the desk phone in the pre-determined position.
8 Press firmly to adhere.

Plantronics CS500 Specifications

General

Wireless Technology	DECT
Range	Up to 350 feet
Noise-Canceling Microphone	Yes
Convertible Wearing Styles	Yes
DECT Security Certification	Yes
Wearing Style	Over-the-head, Over-the-ear
Headset Weight	22 grams