To Next PageTo Next PageWhy is my pleasant hearth Indoor Fireplace heater not working?
There are several reasons why your Pleasant Hearth Indoor Fireplace heater might not be working. Ensure the heater is properly plugged into a standard 120V outlet. Check your circuit breaker or fuse, and ideally, the heater should be on a dedicated 15 Amp circuit. If these steps don't resolve the issue, there may be a defective ON/OFF switch or loose wiring.
What to do if my pleasant hearth Indoor Fireplace heater is not operating?
If your Pleasant Hearth Indoor Fireplace heater isn't working, first, ensure you are operating it correctly by consulting the operating instructions. Also, check if the thermostat is satisfied; adjust it clockwise to increase the room temperature. If the vents are dirty or clogged, unplug the unit, clear any dust and debris, wait ten minutes, then plug it back in and turn on the heater.
How to fix the flame effect on my pleasant hearth GLF-5002-50 when the power light is on?
If the power light is on but the flame effect is not visible on your Pleasant Hearth Indoor Fireplace, first, make sure you are operating the fireplace correctly by referring to the operating instructions. Then, check if the light bulbs are loose and tighten them. If the flame effect is still not visible, the light bulbs may be burnt out and need replacement.
Why is my pleasant hearth GLF-5002-50 Indoor Fireplace making excessive noise when the heater is on?
Excessive noise during heater operation in your Pleasant Hearth Indoor Fireplace can be due to a few reasons. The fan might be defective. Also dirt or dust on the fan can cause excessive noise; refer to the maintenance section for cleaning instructions.
General| Brand | pleasant hearth |
|---|---|
| Model | GLF-5002-50 |
| Category | Indoor Fireplace |
| Language | English |
Crucial safety precautions for operating the fireplace, including handling hot surfaces and placement.
Specifications for power outlet, circuit requirements, and cord usage for safe operation.
Guidance on proper grounding methods for the fireplace to prevent electrical hazards.
Safety warnings related to battery usage and handling of the remote control unit.
Step-by-step instructions for assembling the fireplace unit and securing it.
How to use the main power button and heater control for temperature settings.
Visual representation of the internal electrical components and their connections.
Common causes and corrective actions for when the heater fails to turn on.
