PLINIUS P100 7
Care & Maintenance
With simple care and maintenance your Plinius product can be kept looking and
operating like new for many years to come.
MAINTAINING THE CONNECTORS
The surface of RCA connectors may tarnish when exposed to the environment. Poor
connector condition may degrade audio performance. 'RCA caps', 'RCA shorting caps' and
connector cleaning products can be used to reduce environmental degradation.
NOTE: DO NOT use RCA shorting caps on output connectors. Use RCA shorting caps on
unused input connectors only. Non-shorting RCA caps can be used on any unused input or
output connectors.
MAINTAINING THE SWITCHES
Switches should be maintained by using each various switch setting periodically. Even if a
switch or a switch setting is not used, it is a good idea to toggle small switches and turn
rotary switches though the full range of the switch several times in succession to keep
the contacts active. Performing this simple action will promote longevity of the switch
contacts.
SURFACE CLEANING
From time to time you may wish to clean the surface of your Plinius equipment to remove
dust, or any material build up from the atmosphere or on commonly used controls. Your
Plinius product is made up of parts that have a hard anodised or a powder coat nish and
will clean easily without being damaged.
Cleaning should be carried out using a soft cleaning cloth, dry or with either a small
amount of water or a very mild surface cleaner, while observing the following guidelines:
Ǟ As a safety precaution, always switch the equipment o prior to cleaning
Ǟ Always use a cloth that is soft and clean
Ǟ Never use abrasives or polishing compounds anywhere on the unit
Ǟ Never apply liquid directly to the surface of the unit
Ǟ Use the cloth dry or with mild surface cleaners of either liquid or foaming type
Ǟ Apply only small amounts of cleaner to the cloth
Ǟ DO NOT rub the surface but wipe clean only. Excessive rubbing may dull powder coat
or wear the screen printed text.
To Next Page
Loading...
