INSTALLATION
C-20
MacR6-Z0 – USER MANUAL
• MacR6-Z0-P/LPT: Connect the temperature sensor to the gas flow installation.
Maximum cable length between external pulse emitter and MacR6-Z0 logger equals 10 meters.
In case of flooding the opened device immediately take off the battery. That device has to be
examinated by the manufacturer.
Protection level will be kept only with proper cables diameters usage, tightning cable glands,
sealing ring arrangement and tightning the front cover with 0,65Nm momentum (maximum
0,75Nm).
Battery replacement, SIM card insertion and external antenna cable connection are allowed only
out of the the hazardous explosive zone.