13
Remove the printer cartridge installation seals and the protective sheet used for shipping before using the printer
for the first time. Please see your printer manual for details.
(1) Press the ON/Standby button of the Copyboard and switch on the power.
(2) Switch on the printer power.
(3) Open the top cover and open the paper tray.
(4) Install the print cartridge in the printer.
(5) Set A4 or letter size paper.
(6) Write or draw a diagram on the sheet surface.
(7) Check that the number of copies indicated in the display window of the Copyboard is “01” and then press the Print
button. (On the C-11 Series, the display will indicate “PC” or “OP”. Check this indication and press the Print
button .)
The Copyboard will read a one-screen portion and when this operation stops, the printing operation begins.
CAUTION
Depending on the printer, the display indicators might flash after turning on the power and continue to flash until printing preparation is
completed. If this occurs, refer to the printer manual and start the printing operation with the Copyboard after checking that printing
preparation has been completed.
8. TEST PRINT
To Next Page
Loading...
