The Pocket Radar Smart Display (model SD2000) is a flexible, pro-performance speed display designed to work with Pocket Radar devices, specifically the Pro Radar Module (RM1500) and the Smart Coach Radar (SR1100). It provides accurate and instant feedback for sports and analytics, viewable up to 100 feet in bright sunlight with a wide viewing angle and a full 3-digit display. The display is lightweight and ultra-portable for both indoor and outdoor use, featuring automatic brightness adjustment based on lighting conditions. It can be powered by standard Alkaline C-size batteries or externally via standard USB chargers or Power Packs.
Function Description:
The Smart Display serves as an external screen for Pocket Radar devices, showing speed readings in either Miles Per Hour (MPH) or Kilometers Per Hour (KPH). It stores the last 25 speed readings in its memory, allowing users to recall and review previous measurements. The display also offers advanced settings for customization, including measurement units, sensitivity/range, auto-off timer, auto-on functionality, and brightness levels.
Important Technical Specifications:
- Nominal Operating Frequency: K-Band 24.125 GHz
- Measures From: 25 to 130 MPH (40 to 209 KPH)
- Accuracy: +/- 1 MPH (+/- 2 KPH)
- Range (Pro Radar Module): Baseball up to 200 feet, Larger Objects up to 300 feet (under good measurement conditions).
- Range (Smart Coach Radar): Baseball up to 120 feet, Larger Objects up to 200 feet (under good measurement conditions).
- Smart Display Size: Height 8.75 inches, Width 11 inches, Depth 2.75 inches.
- Pro Radar Module Size: Height 5.75 inches, Width 4 inches, Depth 8 inches.
- Smart Coach Radar Size: Height 4.7 inches, Width 2.3 inches, Depth 0.8 inches.
- Smart Display Weight: 2 lbs. 6 oz. (without batteries), 3 lbs. 0 oz. (with 4 Alkaline C-size batteries).
- Pro Radar Module Weight: 2 lbs. 2 oz.
- Smart Coach Radar Weight: 4.5 oz. (with 2 AAA Alkaline batteries).
- Typical Battery Life (Smart Display): 14 hours with 4 Alkaline C-size batteries.
- Typical Battery Life (Smart Coach Radar): 14 hours in Constant-On Mode or 4,000 manual button presses using 4 Alkaline C-size batteries (not included).
- Operating Temperature Range: -22° F to 140° F (-30° C to 60° C).
- Storage Temperature: -40° F to 185° F (-40° C to 85° C).
- Memory Recall Function: Stores 25 readings deep.
Usage Features:
- Compatibility: Works with Pro Radar Module (RM1500) and Smart Coach Radar (SR1100).
- Power Options: Can be powered by 4 Alkaline C-size batteries (not included), USB Power Packs (not included), or a 2 amp AC power supply (USB charger, included).
- Mounting Options: Versatile mounting options include:
- Using two included carabiners to hang on a metal fence or tripod legs.
- Mounting to a camera tripod via a tripod mount on the bottom.
- Sitting on a chair or table.
- Using the adjustable handle as a kickstand for ground placement.
- Hanging on a wall using the handle.
- Ease of Setup: Simple connection using two 6 ft (2 meter) USB cables (Type A to Micro B, included) to connect the Smart Display to a power source and to the radar device.
- Power On - Self Test: Upon powering on, the display flashes "888" for 2 seconds to indicate a successful self-test. Error codes (e.g., "E #") are displayed if the self-test fails.
- Battery Level Indicator: Displays current battery level (Lo, 1, 2, 3, or 4) for Alkaline C-size batteries or "U5b" for USB power. "Lo/bAt" indicates less than 20 minutes of operation remaining.
- Recall Memory: Accesses the last 25 recorded speeds by tapping the black Mode button. The memory is cleared when the display is turned off or advanced settings are modified.
- Clear Memory: Pressing and holding the Mode button for 2 seconds until "[Lr" displays clears the stored speeds.
- Advanced Menu: Accessed by holding both the Power (red) and Mode (black) buttons for 2 seconds. This menu allows users to customize:
- Measurement Units (unt): Switch between MPH (default) and KPH.
- Sensitivity / Range (5En): (Pro Radar Module only) Adjust sensitivity levels from 1 to 10 to optimize performance and minimize interference. Setting 10 is default and most sensitive. Settings 9-6 are for balls traveling 30+ feet. Settings 5-4 are for dimpled practice balls or Ball Exit Speed/Velocity at 30+ feet. Settings 3-1 are for close-up measurements (10-30 feet), with setting 1 for large objects like volleyballs or soccer balls.
- Auto-Off / Power-Off Timer (tof): Set the display to automatically turn off after no readings for a specified time (no, 5, 15, 30, 60 minutes; "no" means indefinitely). Default is 15 minutes.
- Auto-On (Aon): Enable or disable automatic power-on when external USB power is supplied. Default is "no".
- Brightness (br): Manually adjust display brightness to Auto (default), Low (dim), or High (very bright). "Aut" automatically adjusts brightness based on ambient light.
- Version (UEr): Displays firmware versions for the Smart Display ("d5P") and the connected radar device ("rdr"). This information is useful for customer support.
Maintenance Features:
- Troubleshooting Guide: Provides information on common issues such as interference, "ghost readings," and cosine error, along with tips to mitigate them.
- Interference: Explains how movement (motors, fans, traffic, tree leaves) and electrical sources (cell phones, Wi-Fi, fluorescent lights) can cause false readings. Suggests testing for interference by measuring with no obvious moving object.
- Ghost Readings: Advises users to use judgment in validating speed readings and suggests adjusting sensitivity levels or repositioning the radar device.
- Angles/Cosine Error: Explains that measuring an object at an angle to the radar beam will result in a slower-than-actual speed reading. Provides a table illustrating speed reduction at various angles and emphasizes aiming the radar directly in line with the object's path.
- Error Codes: A comprehensive list of error codes (e.g., "E 1" for Unsupported Device, "E 2" for External Power Failure) with explanations and recommended fixes.
- Factory Default Settings: Details the default settings for measurement units (MPH), sensitivity/range (10 for Pro Radar Module), auto-off timer (15 minutes), auto-on (no), and brightness (Auto).
- Warranty Information: Includes a two-year limited warranty covering defects in workmanship and materials. Provides details on warranty claims, repairs, replacements, and conditions that void the warranty.
- Customer Support: Contact information (toll-free number and email) for Pocket Radar, Inc. for support, questions, and warranty claims. Users are advised not to return products to retailers for issues.
Need help?
General
To Next Page
