EasyManua.ls Logo

Pocket Radar SD2000 - Factory Default Settings

Pocket Radar SD2000
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
SMART COACH RADAR
FACTORY DEFAULT SETTINGS
FACTORY DEFAULT SETTINGS
MeasurementUnits:MPH(milesperhour)
The Smart Display and Smart Coah Radar out of their boxes will be
set to miles per hour instead of kilometers per hour because it is the unit
preference of most of our users.
Auto - Off / Power - Off Timer: 15 Minutes
The Smart Display and Smart Coach Radar combo will automatically
drop out of Constant-On mode after 15 minutes of no speeds while
using batteries. If the Smart Coach Radar is connected to the App, the
App can turn it back on remotely for up to 30 minutes. After which the
Smart Display will shut down completely.
Auto - On: No
Most users will nd that they do not want the Smart Display and
Smart Coach Radar combo to automatically power on when plugged
in to a USB power source. The Auto-On setting is not for all users. It is
good for permanent installations that want to have it power on when the
AC power is turned on.
Brightness: Auto
Auto mode will switch the display between Lo and Hi automatically
depending on ambient lighting conditions. Outdoors on a sunny day,
the display will automatically brighten when showing speeds to enable
further distance viewing.

Related product manuals