Getting Started 14
If the Device is on when you connect the cable to PC, a di-
alogue window asking to select action – PC link or Charge
– will appear. Charging will start if corresponding mode is
selected only.
POWER MANAGEMENT
To turn on the Device, press and hold On/Off button for
a few seconds until startup logo will appear. When the
Device is ready to operate, an image will be changed to
Main menu or last opened book, depending on settings
(Settings > Personalize > At startup open).
To turn off the Device, press On/Off button continuously
until the Device goes off. If you will press power button
shortly, the keypad of the Device will be locked and the
lock sign will appear in a centre of the screen. To unlock
the keypad, press On/Off button again.
To Next Page
Loading...
