Getting Started 19
CONNECTING TO INTERNET
The Device can be connected to the Internet using Wi-
Fi networks. If you open an application, which requires
Internet access (e.g. Browser, PocketNews), the Device
displays a list of available Wi-Fi connections. If the
network you select is protected, you will be suggested to
enter network key using the on-screen keyboard.
You can pre-congure a connection and set an automatic
connection. To proceed, follow these steps:
1. Go to Settings > Network > Network Access
2. Select On for the Network access checkbox and then
further settings appear: Automatic connection, Connection
to a hidden network, and a list of available Wi-Fi networks.
NOTE If there are no available networks or the signal strength is
week, Available networks aren’t displayed and instead replaced by
Scanning — searching for available networks
To Next Page
Loading...
