Settings 58
Demo mode
switching demo mode for the Device. To activate demon-
stration mode check On in the Demo mode item.
SAVING BATTERY
Here you can set parameters, which help to save battery
charge:
• LED Indication – you may disable LED indication
by selecting Off in this section.
• Power off after — set time of idleness, after which
the Device power off: 10, 20, 30 or 60 minutes.
DEVICE INFO
The following information about Device will be displayed:
Device Model (model, serial number, hardware platform,
Wi-Fi MAC address),
Battery level,
To Next Page
Loading...
