EasyManua.ls Logo

PocketWizard FlexTT5 - Safety Warnings

PocketWizard FlexTT5
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
a
Specications
Specications
Trigger Delay: 0 seconds – “faster than a wire” when using compatible Nikon cameras.
Note: Approximately 900 microseconds delay if using Basic Trigger Mode.
Batteries:
FlexTT5
®
- 2 x AA (IEC:LR6) (60 hours)
MiniTT1
®
- CR2450 or CR2354:
Approximately 30 hours of camera awake time, varies with camera and
Speedlight models.
• Low temperature operation and used batteries will have reduced battery life.
Always use fresh batteries when working in the cold.
• Basic Trigger Mode consumes the battery more quickly and is not
recommended when using the MiniTT1 on a Nikon camera.
Maximum FPS: Up to 12 (varies with camera; i-TTL usage reduces FPS)
Operating Temperature: Above -15º C (5º F) and below 50º C (120º F) for FlexTT5
Above -12º C (10º F) and below 50º C (120º F) for MiniTT1
• Low temperature affects coin cell performance. Always use
fresh batteries in cold temperatures.
Storage Temperature (without battery): Above -30º C (-22º F) and below 85º C (185º F)
English
11

Other manuals for PocketWizard FlexTT5

Related product manuals