PocketWizard FlexTT5 - MiniTT1 and FlexTT5 Key Features; ControlTL

a
Basic Wireless CLS / i-TTL
No ash on camera
1. Slide MiniTT1
®
Transmitter or FlexTT5
®
Transceiver onto camera.
2. Slide Speedlight onto remote FlexTT5 Transceiver. Set the Speedlight for standard i-TTL
mode (not REMOTE or MASTER). Repeat for each remote Speedlight. All remote i-TTL
Speedlights will be treated as one zone of light.
Note: You need a receiving FlexTT5 for each remote Speedlight.
3. Make sure all your PocketWizard
®
radios are on the same channel and take pictures
normally.
This mode is like using Nikon’s Commander Mode/Function with the following settings:
• Remote Groups A, B, and C set to TTL
• Flash Output Level Compensation for all groups set to 0.0 Ev
• MASTER or built-in ash set to - - (ash cancelled)
CLS / i-TTL
English
5