PocketWizard FlexTT5 - Getting Started

Locking Ring
Batteries
2 AA [IEC:LR6]
Adjustable Antenna
Mini-USB Connector (behind antenna)
1/4-20 Mount
(on bottom)
Remote Flash Triggering Port (P2)
Remote Camera Triggering Port (P1)
Nikon-style Hot Shoe
Status LED
TEST/LEARN Button
Conguration/Channel 1
Conguration/Channel 2
Power Off
Zone Switch
English
Transceiver
Lanyard Loop
(Lanyard not included)
• You need a FlexTT5 for each remote Speedlight.
• Set all radios to the same channel.
• Take rst shot at 1/125 so system can properly calibrate timing.
• Turning VR mode ON or OFF requires a calibration shot.
• For most basic functions, operation is identical to Nikon’s CLS / i-TTL system.
3