28
The Cooking Mode
Indicator comes
on, but heating
does not start.
High temperature of
the hob.
Ambient temperature may be
too high. Air Intake or Air Vent
may be blocked.
Heating stops
suddenly during
operation and the
display flashes
“ ”.
Pan Type is wrong.
Heating zones of
the same side
( Such as the first
and the second
zone ) would
display “ ” .
The power board and
the display board
connected failure;
Check the connection.
Fan motor sounds
abnormal.
The fan motor is
damaged.
Replace the fan.
The display board of
communicate part is
damaged.
Replace the display board.
Pot diameter is too
small.
Cooker has overheated; Unit is overheated. Wait for
temperature to return to
normal.
Push “ON/OFF” button to
restart unit.
Use the proper pot (refer to the
instruction manual.)
Pan detection
circuit is
damaged,
replace the
power board.
There is something
wrong with the fan.
Check whether the fan runs
smoothly;
if not , replace the fan.
The power board is
damaged.
Replace the power board.
The Main board is
damaged.
Replace the power board.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob.
To Next Page
Loading...