14
Touching the heating zone selection
control, and an indicator where you
touched will flash.
Select a heat setting by touching the
slider control
• If you don’t choose a heat setting
within 1 minute, the Induction hob will
automatically switch o. You will need
to start again at step 1.
• You can modify the heat setting at
any time during cooking.
Power up
Power down
If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display “ ”will automatically disappear after 1 minute if no suitable
pan is placed on it.
Touching the heating zone selection
control that you wish to switch o.
Finish cooking
To Next Page
Loading...
