1. BEFORE USE
4
1.1 Important
Notice! If these instructions are not followed and the terminal
is damaged it will void the warranty.
• Protect the power cord and modem. If they are damaged they are not to be
used anymore.
• Terminal can only be connected to an electric outlet that has a groud connec-
tion a fuse connection.
• The terminal needs to be placed rmly on a table. It can not be exposed to
direct sunlight, hot temperature, moist or dust.
• The terminal is not waterproof or dustproof, and is intended for indoor use only.
• Poor-quality paper can jam the printer and create excessive paper dust.
• Disconnecting the power during a transaction may cause transaction data les
not yet stored into terminal memory to be lost.
• Never use thinner, trichloroethylene, or ketone -based solvents – they may
cause deterioration of plastic or rubber parts. Do not spray cleaners or other
solutions directly onto the keypad or terminal display.
• If the terminal is damaged it needs to be sent to service. Never try to x the
terminal by yourself.
1.2 Terminal structure
!
To Next Page
Loading...