17
Viewing the Version Information
On the Version section, you can view the Bios
version, EC version, and Quick Menu version.
Viewing the Battery Charge Cycles
On the Battery Charge Cycles section, you
can view the battery charge cycle and bat-
tery status.
Configuring the Programmable
Button (P1)
On the P1 Button Setting section, you can
assign the function for the P1 button.
There are three available options for P2:
- Touch Screen Mode: Toggle the touch screen mode.
- Launch Application: Shortcut key for launching the specific application. To assign
the application, refer to the “Assigning an Application the P2 Button” section.
The default application is Quick menu.
- Barcode trigger: Scan the barcode (if the barcode scanner is integrated).
- Off: No function.
Configuring the Programmable
Button (P2)
On the P2 Button Setting section, you can
assign the function for the P2 button.
There are three available options for P1:
- Stealth Mode: Turn off the LCD backlight, LEDs, speakers, camera flash, and RF devices.
- Night Vision Mode: Adjust the brightness of the LCD under 1.7 nits and turn off the
LEDs and camera flash.
- Off: No function.
To Next Page
Loading...