Configuring External Antenna Switching Mode
Select the respective external antenna tab to configure the setting.
- Tap the Wi-Fi Antenna tab to enable/disable the device to automatically switch to
the external WLAN antenna when it is affixed on a docking station.
- Tap the LTE Antenna tab to enable/disable the device to automatically switch to the
external WWAN antenna when it is affixed on a docking station.
- Tap the GPS Antenna tab to enable/disable the device to automatically switch to
the external GPS antenna when it is affixed on a docking station.
Note:
If the tab is green, this indicates the current function is activated.
Configuring Adaptive Brightness Settings
Tap the Adaptive Brightness tab to enable/disable the device to automatically adjust the
brightness level according to the ambient light.
To Next Page
Loading...
