Polaris 2009 Sportsman X2 500 EFI

To Next Page

To Previous Page

MAINTENANCE

Air Filter

1. Remove the seat.

2. Release the air box cover clips,

and remove the air box cover.

3. Loosen the clamp and remove the

filter.

4. Remove the fabric type pre-filter

from the main filter. Wash the pre-

filter in soapy water, then rinse

and let dry.

5. Reinstall the pre-filter over the

main filter. Install a new main fil-

ter if needed.

6. Reinstall the filter into the air box

and tighten the clamp. Do not

over-tighten the clamp, as filter

damage could occur.

7. Reinstall the air box cover and the

seat.

Main Filter

Pre-Filter

Polaris 2009 Sportsman X2 500 EFI - Air Filter