Page 17
English
Replacing Wear Parts
Replacing Brushes
The cleaner is tted with a brush in front. There are ''wear'' indicators (Figure 20) on
the brush. To maintain cleaner performance at its best, replace the brush as soon
as the wear indicator has been reached. Zodiac recommends that you replace the
brushes every two (2) years.
raised groove becomes
partially flattened,
indicating excessive
wear
Figure 20. Worn Brush Indicator
To maintain cleaner performance at its best you need to replace the brush as soon
as one of the wear indicators is reached (even if the blade wear is not even). It is
recommended that you replace the brush when the rubber is worn down to the top
of the wear indicator (or every two years, whichever comes rst).
To replace a worn brush:
1. Separate the edges of the brush, undo the tabs, and remove the worn brush.
2. Position the new brush underneath the roller with the spikes facing
downwards (Figure 21).
Figure 21. Position the New Brush on Roller
To Next Page
Loading...
Need help?
General
