To Next PageTo Next Page
Need help?Do you have a question about the Polaris 9350 and is the answer not in the manual?
General| Pool Type | In-ground |
|---|---|
| Power Source | Electric |
| Type | Robotic |
| Cable Length | 60 feet |
| Cleaning Area | Floor, Walls, and Waterline |
| Warranty | 2 years |
Important cautions regarding equipment modifications and RF exposure limits.
Guidelines to prevent electric shock hazards from the cleaner and its components.
Measures to prevent injuries to children and avoid drowning incidents.
Specific precautions for using the cleaner in vinyl liner pools to prevent surface damage.
Detailed technical specifications for the Polaris cleaner models.
Instructions for unpacking and verifying all cleaner components are present and undamaged.
Step-by-step instructions for assembling the cleaner's transport caddy.
Procedure for attaching the control unit to the transport caddy.
Safe steps for connecting the cleaner's control unit to an electrical power source.
Proper procedure for immersing the cleaner into the pool and preparing it for operation.
Detailed description of the control unit for the 9350 and P935 cleaner models.
Detailed description of the control unit for the 9450 Sport and P945 cleaner models.
Detailed description of the control unit for the 9550 Sport and P955 cleaner models.
Instructions for initiating a cleaning cycle on all Polaris cleaner models.
Procedure for stopping the cleaner and safely lifting it out of the pool.
Guide to operating the cleaner using the remote control for 9550 Sport/P955 models.
Steps to re-establish communication between the remote and control unit.
Instructions for cleaning and storing the cleaner on its caddy for optimal drying.
How to view the current day and time settings on the control unit.
Procedure for setting the correct day and time on the cleaner's control unit.
Adjusting the pre-set durations for different cleaning modes.
Setting up custom cleaning schedules for specific days and times.
How to cancel individual or all programmed cleaning cycles.
Detailed instructions for cleaning the filter canister after each cleaning cycle.
Important steps to avoid the power cable becoming tangled during operation.
Procedure for replacing worn brushes to maintain optimal cleaner performance.
Step-by-step guide for removing and installing new tires on the cleaner.
Correctly orienting the tires during replacement for proper fit and function.
Using LED flash patterns to diagnose malfunctions on 9350/P935 models.
Viewing status messages and error codes on the control unit for 9450/P955 models.
Common problems, causes, and solutions for 9450/P945 and 9550/P955 cleaners.
Explanation of error codes displayed by the control unit and their corresponding solutions.
