59
THE PERFECT FIT
Suspension Quick Setup Guide
Limiter Strap Adjustment
The front torque arm limiter strap is set at position #1.
POLARIS recommends leaving the limiter strap length at position #1 to
maintain the optimum ride characteristics of the snowmobile. Riders
who desire less ski pressure and more weight transfer toward the rear of
the snowmobile can lengthen the limiter strap by changing to position
#2.
1. Loosen the lock nut.
2. Adjust the limiter strap.
3. Tighten the lock nut.
Torque: 17 ft-lbs (23 Nm).
MORE LITE
MORE BITE
To Next Page
Loading...
Need help?
General
