37
FEATURES
Standard Instrument Cluster
Indicators
Check Engine Indicator
This indicator appears if an EFI-related fault occurs. Do not operate the
snowmobile if this warning appears. Serious engine damage could
result. See your dealer. See page 92 for diagnostic code definitions.
Over-Temperature Indicator
This indicator illuminates to alert the operator that the engine is
overheating. The operator should take action to cool the engine. If the
indicator flashes, continued operation could result in serious engine
damage. Stop the engine immediately.
Low Oil Indicator
The low oil indicator light may flicker at times due to oil movement in
the bottle, but when the light comes on and remains on, add the
recommended oil before further operation. See page 80.
High Beam Indicator
The high beam indicator illuminates when the lights are set to high
beam.
Parking Brake Indicator
This indicator illuminates when the parking brake is engaged. It will
also illuminate when the service brake is in use. See page 70.
Reverse Indicator
This indicator flashes when the snowmobile is in reverse. See page 85.
To Next Page
Loading...
Need help?
General
