65
THE PERFECT FIT
Traction Products
Carbide Skags
A skag is a replaceable bar attached to the underside of the ski to assist
in turning the snowmobile and to prevent ski wear caused by contact
with roads and other bare terrain. Use carbide skags with studded tracks
to help maintain proper steering and control. See page 125.
Maintain a proper balance between the number of studs and the length
of carbide on the skags (the more studs you use, the longer the carbide
on the skags should be). See your dealer's track studding chart.
Wear Strips
Your snowmobile is equipped with integrated stud protection that will
protect the cooling system and tunnel when using a maximum stud
length of 1.325 inches (3.7 cm) for all tracks.
See your dealer’s studding chart for recommended traction accessories.
To Next Page
Loading...
