42
FEATURES
Standard Instrument Cluster
Rider Information Center
Standard/Metric Display
The odometer and temperature displays can be viewed in either standard
or metric units of measurement. Both displays change if units are
changed. The new settings will remain until changed by the operator.
Change Method 1
1. Press and release the MODE button or MODE switch until engine
temperature displays.
2. Press and hold the MODE button or MODE switch until the units
change.
Change Method 2
1. Press and release the SELECT button or SET switch until the
odometer displays.
2. Press and hold the SELECT button or SET switch until the units
change.
To Next Page
Loading...
