DP-20 WEB GUIDE CONTROLLER USER MANUAL
2
2-4
LINE 4 While in the Setup Menus, this line indicates the value
associated with the menu as defined in Line 3. If it is possible to modify
the value, it will be flashing.
LINE 4 While at the Operator Level, in Automatic mode, Servo
Center mode, or Manual mode, if no motor is detected on the Drive
connector (X1), NO MOTOR is displayed on this line.
× 3A.2.2
SETUP (MAN)
GUIDE POINT
-ÜÜÜÜåÜÜ+ +20.0%
3A
MANUAL
× -ãããããáÜÜÜÜ+
NO MOTOR
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D
To Next Page
Loading...
