DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-32
4. Use the ARROW keys to scroll until the desired
language is displayed.
5. Press the ENTER key to store the change or
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
Ø 3B.4.2
SETUP (MAN)
SPRACHE WAEHLEN
DEUTSCH
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D
Custom Menus
3X.5.1, ASC Control
This procedure is used to set the ASC Control to ON or OFF. This setting is
configurable for each sensor mode.
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed.
2. Use the ARROW keys to scroll until CUSTOM
is displayed.
3B
MANUELL
Ø -ãããããáÜÜÜÜ+
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
3. Press the ENTER key to enter the Custom
Menus. The ASC CONTROL menu will be
displayed. The current setting is displayed on
line 4.
4. If necessary, press the SENSOR key to select
the desired sensor mode.
5. Press the ENTER key to enter the ASC
CONTROL menu. The contents of line 4 will
begin flashing.
6. Use the ARROW keys to select OFF or ON.
7. Press the ENTER key to store the new setting
or press the MANUAL key to abort the change.
The system will exit the setup menus, and
return to the Operator Level.
× 3A.5
SETUP (MAN)
SELECT MENU
CUSTOM
× 3A.5.1
SETUP (MAN)
ASC CONTROL
OFF
Ø 3B.5.1
SETUP (MAN)
ASC CONTROL
OFF
Ø 3B.5.1.1
SETUP (MAN)
ASC CONTROL
OFF
Ø 3B.5.1.1
SETUP (MAN)
ASC CONTROL
ON
3B
MANUAL
Ø -ãããããáÜÜÜÜ+
To Next Page
Need help?
General
