Polaris DP-20 User Manual

DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-31
9. Use the ARROW keys to modify the oscillation
speed, as displayed on line 4. The left
ARROW key decreases the time per direction
change (increases speed). The right ARROW
key increases the time per direction change
(decreases speed). If an ARROW key is held
down, the speed of the change increases. If
both ARROW keys are pressed
simultaniously, the fastest speed is selected,
which is 0.01 seconds. Press the ENTER key
to store the changes, or if no key is pressed
within 20 seconds, the changes will be stored
automatically. The counter at the end of Line 3
increments on each direction reversal.
10. Pressing the MANUAL key while the oscillator
is running, will pause the oscillation. PAUSED
will be displayed on line 2. The unit will remain
paused until another command is issued.
11. Pressing the AUTOMATIC key will resume the
oscillator action at the point it was paused.
—OR—
12. Pressing the MANUAL key a second time will
exit the oscillator mode, and return to the
Operator Level.
× 3A.3.8.3.1
RUNNING
× MODE1 1
-ÜÜÜÜÜÜÜÜ+ 0.50s
× 3A.3.8.3.1
RUNNING
× MODE1 10
-ÜÜÜÜÜÜÜÜ+ 0.01s
× 3A.3.8.3.1
PAUSED
× MODE1 10
-ÜÜÜÜÜÜÜÜ+ 0.50s
× 3A.3.8.3.1
RUNNING
× MODE1 10
-ÜÜÜÜÜÜÜÜ+ 0.50s
3A
MANUAL
× -ãããããáÜÜÜÜ+
Language Menu
3X.4.1, Select Language
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until
LANGUAGE is displayed on line 4.
3. Press the ENTER key to enter the Language
Menu. The current language will begin flashing
on line 4.
Ø 3B.1
SETUP (MAN)
SELECT MENU
BASIC
Ø 3B.4
SETUP (MAN)
SELECT MENU
LANGUAGE
Ø 3B.4.1
SETUP (MAN)
SELECT LANGUAGE
ENGLISH
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D

Polaris DP-20 Specifications

General

Brand	Polaris
Model	DP-20
Category	Controller
Language	English