How to fix heavy steering on a Polaris Offroad Vehicle?
To address heavy steering on your Polaris Offroad Vehicle, start by checking the ski alignment. Inspect the skags and skis for any damage. Reduce the IFS preload, and ensure that the spindles and all steering components are moving freely.
What to do if my Polaris Offroad Vehicle darts from side to side?
If your Polaris Offroad Vehicle darts from side to side, begin by ensuring the skis are properly aligned. Verify that the spindles and all steering components turn freely. Check that the skags on the skis are straight. Increase the IFS preload and ensure you're using Accu-Trakt dual skags.
How to stop the rear suspension of my Polaris Offroad Vehicle from bottoming out too easily?
If the rear suspension of your Polaris Offroad Vehicle bottoms out too easily, consider the following adjustments: Increase the FRA position (refer to the setup decal under the hood for the initial position). Increase the X-over tube length (check the setup decal under the hood). Increase the rear track shock coil spring preload and the front track shock coil spring preload. You might also consider changing to an optional stiff rear track shock compression spring or revalving the rear track shock compression damping (consult your dealer for these options). Finally, check the track tension.
What to do if the front end of my Polaris Offroad Vehicle pushes?
If your Polaris Offroad Vehicle's front end pushes, check for worn skags. Inspect for any binding suspension shafts and grease all pivot points. Increase the front IFS preload and shorten the front limiter strap.
Why does the rear of my Polaris Offroad Vehicle ride too stiff?
If the ride in the rear of your Polaris Offroad Vehicle feels too stiff, you can decrease the FRA position (see the setup decal under the hood). Also, decrease the rear track shock coil spring preload. Consider changing to an optional soft rear track shock compression spring or revalving the rear track shock compression damping (consult your dealer for these options). Don't forget to check the track tension.
General| Brand | Polaris |
|---|---|
| Model | Frontier |
| Category | Offroad Vehicle |
| Language | English |
Key information for new owners and drivers, including storage and sales information.
Polaris' commitment to environmental education and responsible snowmobile operation.
Information on snowmobile noise levels and responsible operation.
Locating and recording VIN and engine serial numbers for identification.
Guidelines for safe snowmobile operation, including riding position, apparel, and hazards.
Identifies warning decals and their specific locations on the snowmobile.
Overview of snowmobile controls, indicators, and key components.
Explanation of the Check Engine light and diagnostic codes for EFI systems.
Procedures for tuning suspension and handlebars for optimal riding.
Information on available optional accessories for the snowmobile.
Essential checks to perform before starting the engine and riding.
Guides for starting, breaking in, operating, and towing the snowmobile.
Recommended service schedule and procedures for optimal performance.
Guide to regular maintenance tasks based on mileage and riding conditions.
Instructions for lubricating suspension, steering, and drive components.
Instructions for spark plugs, filters, oil, brakes, steering, suspension, battery, and storage.
Technical data and specifications for the Frontier Classic model.
Technical data and specifications for the Frontier Touring model.
Solutions for common problems with M10 and Edge Touring suspension systems.
Diagnosis and solutions for drive belt wear and burn issues.
Solutions for common engine performance and starting problems.
Information on warranty coverage, anti-theft system, and obtaining service.
Details of the limited warranty, its coverage, and exclusions.
Information regarding the optional second year engine service contract.
To Next Page