Polaris Frontier User Manual

115
MAINTENANCE
Extended Storage
Bearing s
Grease the jackshaft and drive shaft clutch side bearings with Polaris
Premium All-Season Grease or a similar high quality grease to prevent
corrosion. See page 128 for part numbers.
Clutch and Drive System
Remove the drive belt and store in a cool dry location. Lubricate the
sheave faces of the drive and driven clutches with a light coat of oil or
Polaris Cable Lubricant. S ee page 128 for part numbers. Do not
lubricate clutch components, except the driven clutch shaft bushing as
outlined in the Master R epair Manual. See your dealer.
Electrical Connectio n s
Separate the electrical connector blocks and clean any corrosive
build-up from the connectors. Lubricate or pack the connector blocks
with dielectric grease and re-connect. NOTE: Do not grease the TPS
connector.
Replace worn or frayed electrical wire and connectors. Be sure the
wiring harness is properly secured away from sharp edges, steering
linkage, m oving parts, and hot exhaust parts.
Battery
Always prepare and maintain the battery as outlined on page 119.
Tampering with the EFI connections could result in damage to the
vehicle. Do not remove the engine EFI connections. See your
Polaris dealer for all EFI system service.
CAUTION

Polaris Frontier Specifications

General

Brand	Polaris
Model	Frontier
Category	Offroad Vehicle
Language	English