48
THE PERFECT FIT
Edge Touring Suspension
Edge Touring Features
Torsion Springs - Two torsion springs are used on the rear arm of the
ETS. Preload adjustments can be made by turning the rectangular
adjusters with a spark plug wrench.
Optional S pring Rates - Optional springs have been designed to allow
adaptation of the ETS to the varied needs of our customers.
The optional front track spring and the firm torsion spring should be
used if frequent bottoming is encountered during two up riding on
rough trails.
The soft torsion spring should be used for frequent one up riding on
smooth t rails.
Initial Set-up Reference Chart
This chart is only a guideline for initial suspension setup. Your setup
may vary based on your desired riding style.
Torsion
Spring & Block
Setting
RCA
Position
Front Track
Spring Preload
(Inches)
Front Track
Indy Select -
Turns From
Full Open
1 Rider Soft
Firm
Low
Med
1-2
2-3
0.25
0.50
0-1
1-2
2 Riders Soft
Firm
Med
High
3-4
4-5
0.75
1.00 max
1-3
2-3
Optional Torsion Spring Optional Front Track
Spring
Left Hand Right Hand
Soft
Firm
7042242-067
7042240-067
7042243-067
7042241-067
-- -- -- -- -- -- --
7041404-067
To Next Page
Loading...
Need help?
General
