Polaris Genesis 2000

ENGINE
Assembly - Polaris Engines
54.Check Crank Position Sensor (CPS) for proper
clearance (Genesis FFI™ only). The CPS is not
adjustable. If out of specification, replace.
55 . Install oil pump drive coupler.
56 .Grease and install spring and plastic bushing into
flywheel cover.
57. Install a new gasket on flywheel cover and water
jacket cover. Tighten bolts in a criss-cross pattern.
58.Grease O-ring and install starter motor. Torque
mounting bolts to specification.
3/00
4.38
Polaris Sales Inc.