Polaris Genesis 2000

FUEL SYSTEM/CARBURETION
Carburetor / Throttle Body Installation
Carburetor / Throttle Body Installation
1. Place new gaskets on intake manifold.
2. Carefully set carburetors/throttle bodies in place.
3. Install intake silencer base with new gaskets. The
silencer bolt flange must be positioned as shown
towards the engine.
4. Apply Loctite™ 242 Blue to mounting bolts. Install
bolts aligning all gaskets. Torque to
specifications.
Carb Mounting Bolt Torque -
Apply Loctite 242 Blue
108 in. lbs. (12.5 Nm)
3/00
3.36
Polaris Sales Inc.