152
Maintenance
Suspension Settings
Use a flat-blade screwdriver to make damping adjustments. When the adjuster screw is
turned clockwise until it stops, the damping is in the fully closed position.
Rear Shock (Standard and Limited Edition)
Front Shock (Limited Edition)
Setting Compression Damping Rebound Damping
Softest 20 clicks from closed 24 clicks from closed
Factory 10 clicks from closed 16 clicks from closed
Firmest 2 clicks from closed 2 clicks from closed
Setting Compression
Softest 20 clicks from closed
Factory 10 clicks from closed
Firmest 2 clicks from closed
To Next Page
Loading...
Need help?
General
