Polaris Outlaw 450 MXR User Manual

157
Maintenance
Rear Suspension
Compression Damping
Use a flat-blade screwdriver to make damping adjust-
ments. The factory setting is at 10 clicks from fully
closed. See Suspension Settings on page 152.
The compression damping clicker is located on top of
the shock reservoir, under the right rear fender.
1. Turn the clicker clockwise (1) to increase compres-
sion damping.
2. Turn the clicker counter-clockwise (2) to decrease
compression damping.
Clicker
1
2

Polaris Outlaw 450 MXR Specifications

General

Brand	Polaris
Model	Outlaw 450 MXR
Category	Offroad Vehicle
Language	English