EasyManua.ls Logo

Polaris Outlaw 450 MXR - Operating Your ATV; Break-In Period and Pre-Ride Inspection

Polaris Outlaw 450 MXR
205 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
Operation
Failure to operate the ATV properly can result in a collision, loss of control, accident or overturn, which
may result in serious injury or death. Read and understand all safety warnings outlined in the safety
section of this owner’s manual.
Break-In Period
The break-in period for your new Polaris ATV is the first three hours of operation, or the
time it takes to use 5-6 gallons (20 liters) of fuel. No single action on your part is as impor-
tant as following the procedures for a proper break-in. Careful treatment of a new engine and
transmission will result in more efficient performance and longer life for both.
Do not allow engine speed to exceed 7000 RPM during the break-in period. Follow the
break-in period with an additional 12 hours of cautious operation, with engine speed below
75% of capacity.
NOTICE: Failure to perform the recommended break-in maintenance can result in serious engine
damage.
WARNING

Table of Contents

Related product manuals