118
Maintenance
Lights
Headlight Lamp Replacement
When servicing a halogen lamp, avoid touching the lamp with bare fingers. Oil from your
skin leaves a residue, causing a hot spot that will shorten the life of the lamp. If fingers do
touch a lamp, clean it with denatured alcohol.
1. Remove the wire harness connector from the back of the headlight.
2. Grasp the bulb housing and turn it counterclockwise to remove the bulb.
CAUTION! Hot components can cause burns to skin. Allow lamps to cool before servicing.
3. Apply dielectric grease to the socket and install the new bulb. Rotate firmly. The bulb
must be positioned so the harness installs into the lamp at outer side.
4. Reinstall the connector to the back of the headlight.
To Next Page
Loading...
Need help?
General
