Polaris Outlaw 525 IRS User Manual

114
Maintenance
Engine Oil Change
Cleaning the Long Oil Screen
1. Remove the long screen plug, located
on the side of the engine near the engine
number.
2. Remove the oil screen. Clean the screen
thoroughly and blow with compressed
air.
3. Check the O-rings. If damaged, install
new O-rings.
4. Place the long oil screen on a pin-type
key or similar tool of about 12 inches
(300 mm) in length.
Plug

Polaris Outlaw 525 IRS Specifications

General

Brand	Polaris
Model	Outlaw 525 IRS
Category	Offroad Vehicle
Language	English