Polaris Outlaw 525 IRS User Manual

176
Maintenance
Rear Suspension
Compression Damping
The compression damping clickers are located on the
bottom of the shocks (on the lower clevis). Use a
screwdriver to make adjustments.
To set the shock at the softest setting (position #1) turn
the screw counter-clockwise until it stops. From this
position, turn the screw clockwise to increase com-
pression damping.
Setting Compression Damping
Softest Position #1
Factory Position #4
Firmest Position #7
Clicker

Polaris Outlaw 525 IRS Specifications

General

Brand	Polaris
Model	Outlaw 525 IRS
Category	Offroad Vehicle
Language	English